Hide Windows XP Instructions

Bring up the control panel by clicking on Start -> Control Panel. If the control panel is in Classic View as shown below, then click in Category View to see the simplified panel.

---

From the Category View click on Network and Internet Connections

---

Now click on Network Connections from the or pick a control panel icon section

---

Select the Create a new connection from the menu on the left of the screen

---

You should now see the New Connection Wizard click next to start.

---

Select Connect to the workplace at my work and click next to continue.

---

Select Virtual Private Network as the connection type and click next to continue.

---

Give the new VPN connection a name and click next to continue.

---

If you already have a dialup or VPN connection setup on your laptop you will now be asked if you want to always dial one of these existing connections before you make the VPN connection. Because we are going to be using a wireless link to get internet connectivity select Do not dial the initial connection and click next to continue. If you don't already have a dialup or VPN connection setup then this screen will not appear, and you will go straight to the next screen.

---

Now enter the address for your VPN and click next to continue. The address for this gin is test.moisturemirror.com.

---

Now click finish and your new VPN connection will be ready to use.

---

To start your VPN Connection, go to the Start menu and click on Connect To.

---

Log in with your user name and password. For this Test VPN, the user is 'mirror' and the password is 'guest'

---

 When you are ready to disconnect from the VPN, right click on the VPN Tunnel icon at the bottom right corner of your monitor, and select Disconnect VPN Tunnel, or simply close out of the Netgear window.

Hide Windows Vista Instructions

Start off by clicking on Start -> Connect To.

---

From the Connect to a network window, click on Set up a connection or network.

---

Now click on Connect to a workplace

---

Select the Use my Internet connection (VPN).

---

Type in the Internet Address for this connection (test.moisturemirror.com) and Name it. Leave the other options unchecked.

---

Enter your User name and Password. For this test, the user is mirror and the password is guest. Check the boxes to show your password or remember the passoword however you prefer.

---

When you click Connect, it will try to connect to the VPN.

---

When it is successful, it will display You are connected

---

It may ask you to select a location for this network. If so, select Work

---

Confirm the settings and click Close

---

To connect to your VPN, click Start -> Connect To

---

Select the VPN, then Click Connect

---

Enter your user name and password, if they haven't been saved and Click Connect

---

Select one of the links from the top of this screen to View it live.

You are now viewing an up-to-date reading of a Moisture Mirror at SJI!

---

When you are ready to disconnect from the VPN, Go back to Start -> Connect To, select the VPN and click Disconnect

Hide Windows 7 Instructions

Start off by right-clicking on the Network icon, then select Open Network Sharing Center

---

Next, select Connect to a network.

---

Select Connect to a Workplace, then click Next.

---

Choose Use my Internet Connection (VPN).

---

Enter the address (test.moisturemirror.com). Then type a name for the connection. Then leave the option boxes unchecked and click Next.

---

Type in your User Name and Password. The User name is mirror and the password is guest. Check the box to remember the password, if you prefer. Then click Connect.

---

Windows will now attempt to connect to the VPN. After the connection is made, you can click Close.

---

To reconnect after setting up the VPN for the first time, Right-Click on the Network icon in the bottom right of the screen and click on Connect.

---

You will have to either enter your password or confirm your user name. Then click Connect. If you are asked for a location, select Work Network.

---

After you're connected, you can click on one of the links at the top of this page to view it live.

You are now viewing an up-to-date reading of a Moisture Mirror at SJI!

---

To disconnect, Right click on the Network icon in the bottom right, and the select Disconnect next to the VPN connection

Hide Mac OS X Instructions

Start by opening System Preferences from the Menu Bar.

---

Next, select Network.

---

In Network Preferences, Click the + button.

---

Select VPN as the Interface, PPTP as the VPN Type and type a name for the connection. Then click Create

---

Leave Configuration set to Default, enter test.moisturemirror.com as the Server Address and enter "mirror" as your user name.

---

If you'd like for your password to be saved, Click Advanced and enter your password in the Password field. Otherwise, you will be asked to enter your password each time you connect.

---

It's recommended that you check the box labeled Show VPN Status in Menu Bar so that accessing the VPN is easier.

---

At this point, Click Apply in the bottom right corner, then click Connect. The status at the top of the window should show Connected.

---

After you're connected, you can click on one of the links at the top of this page to view it.

You are now viewing an up-to-date reading of a Moisture Mirror at SJI!

---

To disconnect or reconnect to the VPN, Click on the Lock icon on the Menu Bar and select Connect or Disconnect the VPN.

Hide iPhone Instructions

NOTE: MOBILE MIRROR FREE DOES NOT REQUIRE THE USE OF A VPN CONNECTION.

---

Tap on the Settings app.

---

Tap General.

---

Tap Network.

---

Scroll down to VPN and select it.

---

Select Add VPN Connection....

---

Select PPTP, and enter the following information:
Description: A Name for the connection.
Server: test.moisturemirror.com
Account: mirror
RSA SecurID: OFF
Password: Blank if you want to be asked everytime, or guest if you would like to to be saved.
Encryption Level: Auto
Send all Traffic: Off

Then tap Save.

---

Select your configuration and turn it ON.

---

Press the Home button to return to your homescreen. VPN will be shown in the status bar when connected.
Open the Mobile Mirror app or go to moisturemirror.com in Safari.

---

To connect or disconnect in the future, go to Settings and tap VPN to turn the connection on or off.